Actiontec electronic WNS100 - Manual (Page 22)

18
Actiontec Wireless Network Attached Storage Device User Manual
19
Chapter 3 Using the Administrative Utility
Name
Enter the user name here. Note that punctuation and other special characters (e.g.
* / | \ ) cannot be used in the name.
Comment
Enter a comment here.
Password/Verify Password
Enter the user’s password in these text boxes.
These text boxes are also used to change an existing user’s password, as follows:
1. Select the desired user.
2. Clear the existing values in the password text boxes.
3. Enter the desired password in both the “Password” and “Verify Password” text
boxes. If no password is required, leave both text boxes blank.
4. Click Save as New User.
When creating a new user, enter the desired password in both of these text boxes.
Create Private Folder
If creating a new user:
• Checking this option creates a Group and a Private Folder (Share) with the
same name as the user.
• The “Private Folder (Share) Location” text box allows the user to select
which disk is used for the Private Folder.
• Read/Write access will be granted to the Share.
If changing an existing user:
• The check box has no effect - it will neither create nor delete. This option is
only available when creating a new user.
• However, the user's private folder can be moved to another disk (if
installed) by changing the location, and saving the change.