Actiontec electronic WNS100 - Manual (Page 6)

3
Configuring the
NAS Device
After connecting and setting up the NAS Device (see the included Quick Start
Guide for instructions), the user can perform custom configurations. This chapter
explains how to configure the
NAS Device on the network for various tasks, includ-
ing file sharing, setting up a print server, and changing the password.
Client PC Setup
The following items need to be checked or configured:
• Network Logon (Windows 98 SE and Me only)
• Locating the NAS Device on the network
• Mapping to the NAS Device
Network Logon (Windows 95/98/ME only)
To check the Network Logon, follow this procedure:
1. Check the Window log on: from the computer’s desktop, select Start >
Settings > Control Panel > Network.
Ensure the “Primary Network Logon” is set to “Client for Microsoft
Networks,” as shown below.
2