A&D Premier/TriCheck Blood Pressure MOnitor UA-1020 User Manual
Page 11
E-10
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
ADJUSTING THE CLOCK
The UA-1020 blood pressure monitor has a built-in clock that gives you the time
and date and can tell you when a blood pressure reading stored in memory was
taken. We recommend that you adjust the clock prior to use. To adjust the clock,
follow these simple steps:
1. Press the clock button
located to the right of the display.
2. Use the arrow
buttons to set the year.
3. After reaching the desired year, press the clock button
again.
4. Repeat the process for the month, day and hour.
5. The next setting will be for pressure.
ADJUSTING THE PRESSURE
1. After setting the year, month, day and hour, the next mode is the pressure
setting.
2. Default is
, which stands for automatic.
3. For even more rapid readings, you can adjust the default to about 30 mmHg
or more above your expected systolic pressure.
4. Use the arrow
buttons to set the pressure.
5. After reaching the desired pressure, press the clock button
again.
6. The next setting will be for TriCheck
™
Mode.