A&D Premier/TriCheck Blood Pressure MOnitor UA-1020 - Manual (Page 19)

E-18 In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
ABOUT MEMORY
Note: This device stores the last 90 measurements in memory. The device announces the memory
data values as they are displayed.
1. Press the or button. The average of all
measurements and the number of data are
displayed. (If no data, “0” is displayed.
Press the , or
START
button to turn the
device off.)
2. Each time the button (or the button
to display the data in the reverse order) is
pressed, the memory data is displayed as
follows.
Average of all AM (morning) measurements
taken between 4:00 and 9:59. (In the
example, 10 measurements. If no data, “--” is
displayed.)
Average of all PM (evening) measurements
taken between 18:00 and 1:59. (In the
example, 9 measurements. If no data, “--” is
displayed.)
Most recent data (See No. 35). Three
seconds after the data number display, the
measurement data is displayed.
Last data (No.1). Three seconds after the
data number display, the measurement data
is displayed.
3. After the last data is displayed, press the
button to return the average display of all measurements.
4. Press the
START
button to turn the device off. After one minute of
non-operation, the device will turn off automatically.
Average of
all the data
Average systolic
Average diastolic
Average pulse
Press or
Most recent data
Systolic
Diastolic
Pulse
Last data (Oldest)
Average
of AM data
Average
of PM data
Average systolic
Average diastolic
Average pulse
Average systolic
Average diastolic
Average pulse
Systolic
Diastolic
Pulse