A&D Premier/TriCheck Blood Pressure MOnitor UA-1020 - Manual (Page 25)

E-24 In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
ABOUT BLOOD PRESSURE
ESTABLISHING BASELINE MEASUREMENTS
The most important method to get an accurate blood pressure measurement
is consistency. To get the most benefit out of your monitor, it is important
to establish a “baseline measurement.” This helps build a foundation of
measurements that you can use to compare against future readings. To build
this baseline measurement, devote two weeks for consistent blood pressure
monitoring. This involves doing everything the same way when you measure
(e.g. measuring during the same time of day, in the same location, sitting in
the same chair, using the same cuff, etc.). Once you establish your baseline
measurement, you can start evaluating if your measurement has been affected
based on things like lifestyle changes or medication treatment.
HOW DO I RECORD MY BLOOD PRESSURE?
Blood pressure readings are typically recorded with the systolic pressure written
first, followed by a slash mark and the diastolic pressure. For example,
120 mmHg systolic and 80 mmHg diastolic measurements are written as 120/80.
Pulse is simply written with the letter “P” followed by the pulse rate—P 72,
for example. Please see the back of the manual for the blood pressure tracking
record.
CUSTOMER SUPPORT TOOLS ONLINE
Additional tools are available on www.andmedical.com to help you get the most
out of your blood pressure monitoring. These include:
• Large Print Instruction Manuals
• Animated Operating Instructions
• Additional Logbook Sheets