Using the network analyzer to control the test set – Agilent Technologies Option H48 Multiport Test Set Z5623A User Manual
Page 33
Agilent Technologies Z5623A Option H48
3-1
3
Using the Network Analyzer to
Control the Test Set
This chapter assumes the following:
•
The instructions in
Chapter 2 , “Installation,”
have been
performed.
•
The test set and associated equipment are connected as shown in
Figure 2-9 on page 2-15
.
This chapter shows you how the network analyzer can be used to
manually control the test set. The method presented here is considered
a manual one because the user manually enters individual commands
on a keyboard connected to the network analyzer. The chapter includes
the following sections:
•
Preparing the Analyzer to Control the Test Set
•
How to Send a Manual Command
•
Common Errors in Manual Commands
•
A List of GPIB Commands
•
Restoring the Analyzer to its Normal Configuration
•
Disaster Recovery