Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 48)

3-16 Agilent Technologies Z5623A Option H48
Using the Network Analyzer to Control the Test Set
Disaster Recovery
Step 4. Click the Hardware tab shown in Figure 3-11 . The result is shown in
Figure 3-12 .
Figure 3-12 “Hardware” Tab In “System Properties” Window
Step 5. Click the Device Manager button. After you do so, there will be a
10-second delay before the “Device Manager” window appears. This
window is shown in
Figure 3-13 and Figure 3-14 .
Step 6. Check to see if the “AT-GPIB/TNT” icon is visible as shown in Figure
3-14 . If it is not, click on the “National Instruments GPIB Interfaces”
icon as in Figure 3-13 .
Click this button.