Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 80)

5 -12 Agilent Technologies Z5623A Option H48
Performance Verification
Setting Up Limit Testing
Setting Up the Limit Table
Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Limit Test... button and click it. See Figure 5-8 .
Figure 5-8 The “Limit Test...” Button
Step 2. When the Limit Test window pops up as shown in Figure 5-9 , click the
Show Table button, then click the OK button.
Figure 5-9 The “Limit Test” Window
Step 3. When the Limit Table pops up as shown in Figure 5-10 , transfer entries
from Table 5-4 to the Limit Table on the network analyzer. The result is
shown in Figure 5-11 .