Poweramp HNL SERIES HYDRAULIC - Manual (Page 29)

27 Manual No. 4111-0029
November 2009
May 2012
OPERATION
1. Grasp the captured operating handle and raise to its
full extended length.
2. Move handle toward you, rotating center plate back
past vertical. Lip plate extend link arm will engage
at this time.
3. Push forward on operating handle against the rivet,
rotating leveler out onto truck.
4. Return handle to stored position.
5. To remove leveler from truck repeat step number
one until the lip clears the bed of the trailer. Return
leveler and handle to the stored position. OR When
the truck departs, the unit will automatically return to
the stored position.
OPERATING INSTRUCTIONS DURING POWER OUTAGE
RIVET