ATON AH66T - Manual (Page 63)

A T O N AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 62
Source Select Control
Description: Selects the source in a zone. Status can be queried.
Examples:
&AH66,AUD,2,1<cr> Selects SOURCE (AUD) ONE (1) in ZONE TWO (2).
&AH66,AUD,5,2<cr> Selects SOURCE (AUD) TWO (2) in ZONE FIVE (5).
&AH66,AUD,11,R1<cr> Selects the INTERNAL RADIO of CHASSIS ONE (R1) in ZONE
ELEVEN (11).
&AH66,AUD,8,?<cr> QUERIES (?) the SELECTED SOURCE (AUD) in ZONE EIGHT (8).
Possible QUERY responses are:*AH66,AUD,8,0, *AH66,AUD,8,1, etc., where 0=Zone is
OFF, 1=Source one, 2=Source two, 3=Source three, 4=
Source four, 5=Source five, 6=Source six, R1=CHASSIS 1’s
Internal Radio, R2=CHASSIS 2’s Internal Radio.
Stereo / Mono Control
Description: Sets a zone to Stereo or Mono, or TOGGLES the state. Status can be queried.
Examples:
&AH66,STMO,6,0<cr> Sets the STEREO/MONO (STMO) setting of ZONE SIX (6) to
STEREO (0).
&AH66,STMO,2,1<cr> Sets the STEREO/MONO (STMO) setting of ZONE TWO (2) to
MONO (1).
&AH66,STMO,3,2<cr> TOGGLES (2) the STEREO/MONO (STMO) setting of ZONE
THREE (3).
&AH66,STMO,5,?<cr> QUERIES (?) the STEREO/MONO (STMO) setting of ZONE FIVE
(5).
Possible QUERY responses are:*AH66,STMO,5,0 or *AH66,STMO,5,1 where 0=STEREO
and 1=MONO.
Prefix Command Parameter 1
Zone #
Parameter 2
Source
&AH66 AUD 1-12 0-6/R1/R2/?
Prefix Command Parameter 1
Zone #
Parameter 2
Output State
&AH66 STMO 1-12 0/1/2/?