Teledyne 9110EH - Nitrogen Oxides Analyzer - Manual (Page 109)

Model 9110EH Instruction Manual Operating Instructions
SAMPLE RANGE = 500.0 PPB NOX=X.X
< TST TST > CAL
SETUP
SETUP X.X CONC : DATA AVAILABLE
NEXT VIEW EXIT
SETUP X.X ENGDAT: DATA AVAILABLE
PREV NEXT VIEW EXIT
SETUP X.X CALDAT: DATA AVAILABLE
PREV VIEW EXIT
SETUP X.X 00:00:00 NXSLP1=0.000
PV10 PREV <PRM PRM> EXIT
SETUP X.X 00:00:00 NXCNC1=0.0 PPM
PV10 PREV NEXT NX10 <PRM PRM> EXIT
SETUP X.X 00:00:00 SMPFLW=000.0 cc / m
<PRM PRM> EXIT
SETUP X.X DATA ACQUISITION
VIEW EDIT EXIT
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE
EXIT
VIEW KEYPAD FUNCTIONS
KEY FUNCTION
<PRM Moves to the next Parameter
PRM> Moves to the previous
Parameter
NX10 Moves the view forward 10
data points/channels
NEXT Moves to the next data
point/channel
PREV Moves to the previous data
point/channel
PV10 Moves the view back 10 data
points/channels
Keys only appear as needed
EXIT will
return to
the main
SAMPLE
Display.
6.10.2.3. Editing iDAS Data Channels
IDAS configuration is most conveniently done through the APICOM remote control program.
The following list of key strokes shows how to edit using the front panel.
M9110EH Rev 0 95