Teledyne GC-Pro/FID - Gas Chromatograph - Manual (Page 89)

GC-Pro FID Operation
Teledyne Analytical Instruments 75
Note: If the analyzer is equipped with the Auto Calibration
feature, input from this screen will override the Auto
Calibration status.
To manually change the gas stream sent to the analyzer, press
Change Stream from the SETTINGS screen. The following screen will
appear:
Touch the UP arrow to toggle the display between
ANALYZE/SPAN /ZERO. Pressing UPDATE will select the displayed
stream and open the corresponding valve. Use CANCEL to abort the
selection.
The user can return to the analyze mode by pressing the HOME icon
or go back to the SETTINGS screen by touching the BACK button.
4.7.12.4 T IME
The date and time are set from the Time screen. Select Time from
the SETTINGS screen.
Touching any of the Date and Time value boxes will bring up a
numerical keypad that allows the date and tie to be input. The time
settings entered in this screen sets the RTC which is interfaced to 9261
board on the I2C interface.
After selecting Time, the following below screen displays: