Teledyne GFC-7000E - Trace CO2 Analyzer - Manual (Page 236)

Model GFC7000E Instruction Manual APPENDIX A-1: MGFC7000E Software Menu Trees, Revision E.0
045840110 Rev B.3 225
• MODEL NAME
• SERIAL NUMBER
• SOFTWARE
REVISION
• LIBRARY REVISION
• iCHIP SOFTWARE
REVISION 1
• HESSEN PROTOCOL
REVISION 1
• ACTIVE
SPECIAL SOFTWARE
OPTIONS 1
• CPU TYPE
• DATE FACTORY
CONFIGURATION
SAVED
CFG
PREV NEXT
CLK PASS MORE
TIME DATE
ON
OFF
SNGL DUAL AUTO
MODE SET UNIT
RNGE DAS
Go To iDAS
MENU TREE
(Fig. A-5)
Go To
SECONDARY SETUP MENU
(Fig. A-4)
<SET SET>
ACAL 1
PREV NEXT
SEQ 1)
SEQ 2)
SEQ 3 )
PREV NEXT
DISABLED
ZERO
ZERO/SPAN
SPAN
TIMER ENABLE
STARTING DATE
STARTING TIME
DELTA DAYS
DELTA TIME
DURATION
CALIBRATE
RANGE TO CAL 3
MODE SET 2
ENTR
EDIT
LOW 3 HIGH 3
PPM UGM MGM PPB %
SETUP
ENTER SETUP PASS: 818
1 Only appears if a applicable
option/feature is installed
and activated.
2 Appears whenever the
currently displayed
sequence is not set for
DISABLED.
3 Only appears when
reporting range is set to
AUTO range mode.
ENTR
Figure A-3: Primary Setup Menu (Except iDAS)