Teledyne GFC-7000E - Trace CO2 Analyzer - Manual (Page 239)

Model GFC7000E Instruction Manual APPENDIX A-1: MGFC7000E Software Menu Trees, Revision E.0
045840110 Rev B.3 228
INSTRUMENT IP 5
GATEWAY IP 5
SUBNET MASK 5
TCP PORT 3
DHCP
INSTRUMENT
IP
GATEWAY IP
SUBNET MASK
TCP PORT 3
HOSTNAME 4
CFG
ACAL 1
SETUP
CLK PASS RNGE DAS MORE
COMM VARS DIAG
Go To
DIAG MENU TREE
(Fig A-6)
1 Only appears if a valve option is installed.
2 Only appears when the Ethernet card (option 63) is installed.
3 Although TCP PORT is editable regardless of the DHCP state, do not change the setting for this property unless
instructed to by Teledyne Instruments Customer Service personnel.
4 HOST NAME is only editable when DHCP is ON.
5 INSTRUMENT IP, GATEWAY IP & SUBNET MASK are only editable when DHCP is OFF.
COM1
PREV NEXT JUMP EDIT PRINT
DAS_HOLD_OFF
CONC PRECISION
DYN_ZERO OFF
DYN_SPAN OFF
CLOCK_ADJ
ID
ENTER SETUP PASS: 818
<SET SET>
INET 2
COMM - MENU TREE
(Fig A-5) EDIT
ON
OFF EDIT
Figure A-6: Secondary Setup Menu (COMM Menu with Ethernet Card)