FEC AFC1100 - Manual (Page 12)

)(& ,QF
7.2.5 STATUS display
This display will indicate when the STOP signal has halted the AFC 1100. The STATUS
display will indicate conditions as shown below (the [D-NO] display is not active).
1) When the STOP signal is activated:
The [DATA] display will show STOP.
D-NO DATA
PARM/
ABN ANGL
SPNO
2) When an abnormal condition occurs:
The [DATA] display will show ABN.
The display will indicate ABN and the ANGL/SPNO display will show the corresponding
SERVICE CODE #.
This shows a case where the abnormal number is 3 and the service code is 0. (Refer to
chapter 9)
D-NO DATA
PARM/
ABN ANGL
SPNO
Chapter 7: System Operations (Rev. 8/98)
Page 7-12