Installing a pci add-in card – Acer Altos R710 User Manual
Page 77
65
Installing board onto PCI Riser assembly. This refers to
the two small boards on the riser assembly itself. These
are the boards into which an add-in card is inserted
7
Repeat steps 3 – 5 on the other riser card.
8
Install the PCI add-in card(s), if desired.
9
Install the riser assembly into the chassis.
10 Install Processor Air Duct.
11 Install the chassis cover.
Installing a PCI Add-in Card
In the slots provided by the PCi riser card, you can install either three or
six PCI add-in cards.
Peripherals and add-in cards are not included in your system and must
be purchased separately. The riser card at the center of the chassis
supports three full-height add-in card or three low profile PCI add-in
card. If a low profile card is installed in the standard full-height riser
card, it must be equipped with a standard full-height PCI mounting
bracket.