Darex XPS-16 SCHEMATICS & WORK INSTRUCTIONS - Manual (Page 24)

User Manual Page 24
6. Remove the 7, ¼” acorn nuts from the LCD.
Note: One is inaccessible and has no nut.
Slide the LCD out.
1. To replace the LCD, slip back through the
front of the top cover. Hold in place with your
hand and install acorn nuts just until one to
two threads protrude past the surface of the
nut. A thin wall ¼” socket is necessary for
clearance.
2. Plug in interface board, green five wire con-
nector and the RS232 connector and screw.