Darex XPS-16 SCHEMATICS & WORK INSTRUCTIONS - Manual (Page 29)

User Manual Page 29
1. Turn the machine on.
2. Push the check icon.
3. Push the tool icon.
Removing and Replacing Grind Motor Assembly
4. Push the belt change icon.
5. The X-Axis will move into the belt change po-
sition and stop. Shut the machine off and dis-
connect power source.
6. Refer to Grind Motor Belt Replacement instruc-
tions and remove belt. See Section 24 Sche-
matics and Work Instructions page 29.
7. Unplug the motor connector wires.