Direct Lift PP8 Plus Long - Manual (Page 10)

10
OWNER / EMPLOYER RESPONSIBILITIES
The Owner / Employer:
• Shall ensure that lift operators are qualified and that they are trained in the safe use and operation of the
lift using the manufacturer’s operating instructions; ALI/SM01-1, ALI Lifting it Right safety manual;
ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for Automo
tive Lifts-Safety Requirements for Operation, Inspection and Maintenance; ALI/WL Series, ALI
Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle
Lifting Points/Quick Reference Guide for Frame Engaging Lifts.
• Shall establish procedures to periodically inspect the lift in accordance with the lift manufacturer’s
instructions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; and The Employer Shall ensure that lift
inspectors are qualified and that they are adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance with the lift manufacturer’s
instructions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; and The Employer Shall ensure that lift
maintenance personnel are qualified and that they are adequately trained in the maintenance of the lift.
• Shall maintain the periodic inspection and maintenance records recommended by the manufacturer or
ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements for Opera
tion, Inspection and Maintenance.
• Shall display the lift manufacturer’s operating instructions; ALI/SM 93-1, ALI Lifting it Right safety man
ual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and Maintenance; and in the case of frame engag
ing lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts; in a
conspicuous location in the lift area convenient to the operator.
• Shall not modify the lift in any manner without the prior written consent of the manufacturer.
• Shall provide necessary lockout/tagout means for energy sources per ANSI Z244.1-1982 (R1993), Safety
Requirements for the Lockout/Tagout of Energy Sources, before beginning any lift repairs.
Lift Lockout/Tagout Procedure
Purpose
This procedure establishes the minimum requirements for the lockout of energy that could cause injury to per-
sonnel by the operation of lifts in need of repair or being serviced. All employees shall comply with this proce-
dure.
Responsibility
The responsibility for assuring that this procedure is followed is binding upon all employees and service person-
nel from outside service companies (i.e., Authorized Installers, contactors, etc.). All employees shall be instruct-
ed in the safety significance of the lockout procedure by the facility owner/manager. Each new or transferred
employee along with visiting outside service personnel shall be instructed by the owner/manager (or assigned
designee) in the purpose and use of the lockout procedure.