Fairbanks OMEGA SERIES COUNTING SCALE - Manual (Page 60)

Appendix III: Data Output
04/13 60 51278 Rev. 2
B. INPUT COMMANDS FORMAT
The scale can be controlled with the following commands.
Input Commands:
All commands are terminated by a carriage return (Enter button on PC
keyboard) with line feed (if necessary).
If an illegal command is received or a command cannot be carried out ,
repeat the command with an addition of the word Error in front of the
command request. For example if the command is Test<CR><LF> then
send back Error Test<CR><LF>.
Basic Commands:
CW Print the current net weight.
M+ Store current results into accumulation memory.
MC Clear the accumulation memory.
MR Recall the accumulation memory values to scale display, same
as RECALL key.
PLUxx Select PLU from scale memory to be used
S123
Enter sample size of 123 parts. Same as pressing key.
T Tare current weight value
T123.456 Preset tare value is 123.456
For pound mode, it’s 123.456lb.
For kg mode, it’s 123.456kg.
U123.456 Store unit weight of 123.456
For pound mode, it’s 123.456lb.
For kg mode, it’s 123.456kg.
Z Zero operation.