Fairbanks 4100 SERIES Pallet Weigh Plus - Manual (Page 20)

Section 4: Operation
10/13 20 51287 Rev. 2
2. The display shows “add10”. The lb indication turns off and the pcs indication
is indicated.
3. Take or place 10 pieces from/on the weighing system and press the key.
4. The sampling is done and the display will show the total number of pieces on
the weighing system.
OR
5. Press the key or the key to change the number of pieces to add.
6. The display will show the new value to add (for example “add50”).
7. Take or place the correct number of pieces from/on the weighing system and
press the key.
8. The sampling is done and the display will show the total number of pieces on
the weighing system.
You may make a printout and add up the weights. A special printout will be made
which includes the piece weight sampled and the number of pieces Return to the
normal weighing mode is accomplished by pressing the
key for 1 second . Upon the return to normal weighing mode, the piece count
total will be lost.
4.4.8. PIECE WEIGHT ENTRY
1. Press the key for 3 seconds.
2. The last used piece weight will be displayed.
3. The right digit flashing.
4. To accept the old value press key.
5. The display shows the number of pieces currently on the weighing system.
OR
6. Press the key for 3 seconds.