Fairbanks 4100 SERIES Pallet Weigh Plus - Manual (Page 23)

Section 4: Operation
10/13 23 51287 Rev. 2
5. Press the key to go up a value or press the key to go down a value
until the required value is reached.
6. Press the key to change to the next digit and use the or keys to
change the value until the required value is reached.
7. To accept the new value press the key
8. The display will show “m_00” or the previous minute time setting.
9. The right digit flashing.
10. Repeat the above procedure to accept or change the minute setting.
11. The display will show “dA_00” or the previous date of the month setting
12. The right digit flashing.
13. Repeat the above procedure to accept or change the date of the month
setting.
14. The display will show “m_00” or the previous month setting.
15. The right digit flashing.
16. Repeat the above procedure to accept or change the month setting.
17. The display will show “YE_00” or the previous year setting.
18. The right digit flashing.
19. Repeat the above procedure to accept or change the year setting.
20. The indicator will return to normal weighing mode.