Fairbanks 4100 SERIES Pallet Weigh Plus - Manual (Page 9)

Section 2: General Policies
10/13 9 51287 Rev. 2
2.1.1. Unpacking
Follow these guidelines when unpacking all equipment:
• Check in all components and accessories according to the customer's order.
• Remove all components from their packing material, checking against the invoice
that they are accounted for and not damaged.
• Advise the shipper immediately, if damage has occurred.
• Order any parts necessary to replace those which have been damaged.
• Keep the shipping container and packing material for future use.
• Check the packing list.
• Collect all necessary installation manuals for the equipment and
accessories.
• Open the equipment and perform an inspection, making certain
that all hardware, electrical connections, and printed circuit
assemblies are secure.
• Do not reinstall the cover if the final installation is to be
performed after the pre-installation checkout.
2.1.2. Equipment Location
Position the equipment with these points in mind:
• Intense direct sunlight can harm the display.
• Work areas should be relatively free from drafts and
vibrations.
• Do not locate near magnetic material or equipment/instruments which use
magnets in their design.
• Avoid areas which have extreme variations in room temperatures. Temperatures
outside the instrument’s specifications will affect the weighing accuracy of this
product.