General Tools and Instruments DCS280 - Manual (Page 4)

KEY FEATURES
• Grip and monitor are drop-resistant to height of 1m (3.3 ft.)
• Standard system includes 1m (39 in.) long, 9mm (0.35 in.) diameter) camera-
tipped probe (with a depth of field of 1 in. to 10 ft.) for reaching deep into
tight spaces. Longer and thinner interchangeable probes are available
(see p. 10)
• Included probe and all optional probes are designed to be oil-, water- and
dust-proof to IP67 standard. The DCS280’s splash-resistant wand-type grip
and monitor are designed to meet the IP54 standard for water ingress
protection
• One-handed operation frees your other hand to use tools
• Powered by readily available “AA” batteries
• Big, bright color LCD shows crystal-clear real-time video
• Included probe is in focus from 1 in. to 10 ft.
• Two adjustable LEDs illuminate dark areas
• Flip video 180° to read labels right-side up and enlarge objects up to
2X to show details
• Video Out jack sends video to a larger screen
• Includes four useful probe tip accessories (magnetic pickup, pickup hook,
45° mirror and thread protector), video cable, batteries and lens cap
• Three-year warranty
SAFETY INSTRUCTIONS
• Do not use the system to inspect environments known or suspected to
contain exposed electrical wiring.
• Do not use it in the presence of flammable or explosive gases.
• Read and understand all of the instructions in this manual before using the
system.
• Stay alert, watch what you are doing, and use common sense. A moment of
distraction can result in serious personal injury.
• Do not over-reach. Keep proper footing and balance at all times, especially
where water is underfoot.
• Always use protective eyewear. A dust mask, non-skid safety shoes, a hard
hat or hearing protection may also be appropriate for certain inspection
environments and tasks.
• Do not use the system to perform medical inspections.
4