Key features, Safety instructions – General Tools and Instruments DCS600 User Manual
Page 4

KEY FEATURES
• Makes it possible for a diver or snorkeler to view inspection video under water in real
time. Other “waterproof” inspection systems lack watertight grips and monitors
• Eliminates concerns about accidentally dropping or dunking grip or monitor in water
• Makes it possible to inspect sewer and water lines carrying running water
• Also ideal for marine search and rescue operations
• Grip, probe and monitor are guaranteed leakproof to depth of 1m; all three components
will also resist leaks at depths up to 2m for short periods (1 hour, max)
• Includes 0.39 in. (10mm) diameter, 3.3 ft. (1m) long close-focus camera-tipped probe
with adjustable LED lighting
• Waterproof probe is flexible-obedient, meaning it retains its shape
• 3.4 in. (86.4mm) color LCD makes videos and images large and crystal-clear
• Video shown on monitor can be inverted 180°
• Video Out jack for connection to NTSC television
• One-year warranty
• Powered by four “AA” batteries
SAFETY INSTRUCTIONS
• Do not use the system to inspect environments known or suspected to contain exposed
electrical wiring.
• Do not use it in the presence of flammable or explosive gases.
• Read and understand all of the instructions in this manual before using the system.
• Stay alert, watch what you are doing, and use common sense. A moment of distraction
can result in serious personal injury.
• Do not over-reach. Keep proper footing and balance at all times, especially where water
is underfoot.
• Always use protective eyewear. A dust mask, non-skid safety shoes, a hard hat or
hearing protection may also be appropriate for certain inspection environments and
tasks.
• Do you use the system to perform medical inspections.
4