General Tools and Instruments DCS600 - Manual (Page 5)

5
WHAT’S IN THE CASE
The DCS600 and its accessories come in a custom molded plastic case. The instrument itself
has two main components: a pistol grip permanently connected to an LCD monitor, and a
10mm flexible-obedient camera-tipped probe. Also in the case is a large Ziploc plastic bag
containing:
• Three probe tip accessories (a 45° mirror, a pickup hook and a magnetic pickup) in their
own small Ziploc bag
• A composite NTSC video cable with a black mini-plug on one end and a yellow RCA plug
on the other
• This user’s manual
PRODUCT OVERVIEW
Fig. 1 shows the labels and positions of the controls and connectors on the front and side of
the DCS600. Familiarize yourself with the controls’ functions before moving on to the Setup
Instructions.
1. Video jack (behind waterproof door
on right side of monitor)
2. 3.4 in. (diagonal) color LCD
3. Brightness up (▲) button
4. Power on/off ( ) button
5. Brightness down (▼) button
6. Battery compartment (on bottom)
7. Camera-tipped probe
8. Camera and LEDs
9. Battery Low ( ) LED (red)
10. Power On ( ) LED (green)
11. Triangular hanger hook (on front of monitor)
ACCESSORIES IN THE CASE
12. 45° mirror
13. Pickup hook
14. Magnetic pickup
15. Video cable
Fig. 1. The SeaScope600’s
controls and connector
1
2
11
3
6
7
12
13
14
15
8
9
10
4
5