Appendix a, Separation – Gentec-EO UM-B User Manual

Page 17

Advertising
background image

17

Revision 2.1

UM-B Series Instruction Manual

Gentec Electro-Optics Inc. All rights reserved

5

APPENDIX A

5.1 Recycling and separation procedure for WEEE directive 2002/96/EC.

This section is used by the recycling center when the detector reaches its end of life. Breaking
the calibration seal or opening the detector will void the detector warranty.

The complete detector contains

1 Detector with wires or DB-15.

1 CD (instruction manual, software and drivers)
1 calibration certificate
1 Personal Wavelength Correction

5.2 Separation:

Paper: certificates
Wires: Cable Detector.
Printed circuit board: inside the Detector and DB-15, no need to separate (less than 10 cm

2

).

Aluminum: Detector casing.

Advertising