Gentec-EO UM-B - Manual (Page 8)

8
Revision 2.1
UM-B Series Instruction Manual Gentec Electro-Optics Inc. All rights reserved
2.3 UM-B SERIES SPECIFICATIONS
The following specifications are based on a one-year calibration cycle, an operating temperature of 15 to
28ºC and a relative humidity not exceeding 80% and a storage temperature from 5 to 45 ºC with relative
humidity not exceeding 80%.
a The calibrations at 2.1 to 2.5 µm and 10.6 µm are on special request only.
Specifications subject to change without notice.
UM9B-BL-D0
Monitor Compatibility
MAESTRO & M-LINK
(with latest firmware version only)
NIG
202024 (without stand)
202111 (with stand)
Effective Aperture Diameter Ø9 mm
Sensor Pyroelectric
Absorber BL
Spectral Range 0.1 - 20 µm
Calibrated Spectral Range
a
0.25 – 2.5 µm
Max. Average Power
With MAESTRO : 20 mW
With M-LINK : 25 mW
Max. Average Power Density 50 mW/cm
2
Power Noise Level (RMS) 300 nW
Optical Chopper Frequency 10 ± 1 Hz
Typical Rise time (0-95%) < 0.2s
Typical sensitivity 120 V/W
Calibration Uncertainty
@ 1.064 µm
± 4.0 %
Dimensions (H x W x D, in mm) Ø38.1 x 26.2
Weight 91 g