King Kooker 2206 Heavy Duty Portable Propane Outdoor Smoker with Cooker Package - Manual (Page 19)

TURNING OFF AND STORING THE COOKER AFTER USE
NEVER MOVE THE SMOKER, COOKER OR POT
WHILE IN USE OR STILL HOT {ABOVE 100˚F(38˚C)}.
1. After each use turn OFF the King Kooker ® at the regulator first, then at the gas cylinder valve.
Check to make sure there is no flame and all valves are OFF. Do not leave the smoker/cooker
until it has cooled completely. When removing food from the smoker/cooker wear protective mitts.
2. Disconnect the regulator from the cylinder by turning the Type 1 fitting counterclockwise until the
regulator is separated from the tank.
3. Storage of this smoker/cooker indoors is permissable only if the cylinder is disconnected and
removed from the cooker. Do not use or store cylinder in a building, garage or enclosed area.
Read and follow cylinder manufacturer’s instructions. The cylinder must be stored out of the
reach of children at all times. Keep entire unit in area to avoid insects and contamination that can
clog the venturi tube.
19
WARNING
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS COULD RESULT IN FIRE,
EXPLOSION, BURN HAZARD OR CARBON MONOXIDE POISONING WHICH COULD CAUSE
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
MAINTENANCE OF OUTDOOR COOKERS AND ACCESSORIES
1. The area where the cooker will be used must be kept clear and free from combustible materials, gasoline
and other flammable vapors and liquids. Before each use of the appliance, inspect and remove any
combustible items.
2. The flow of combustion and ventilation of air must not be obstructed. The cooker must be set in an open
area with 10 ft. (3.05m) of space on all sides and no roof or overhang overhead. Check the location and
placement of the cooker before each use.
3. Before each use of the appliance check the burner/venturi tube for insects, insect nests, and other
obstructions. A clogged tube can lead to a fire beneath the appliance.
4. Follow all Lighting Instructions in the Use and Care Manual each time the cooker is used. Check the flame
for proper color and appearance. The flame should burn with a primarily blue color. If a strong yellow flame
is present, this could indicate an obstruction in the burner/venturi tube.
If there is any obstruction or a yellow flame, and the air shutter adjustment has not solved the problem,
turn off the cooker and allow time for it to cool. Disconnect the hose from the cooker. Remove the air
shutter using a phillips head screwdriver. Check the venturi tube with a flashlight to see if there is a
blockage. If a blockage is present use a wire such as a coat hanger to slide into the venturi tube to remove
the blockage. Reattach the air shutter to the venturi tube using the phillips screwdriver. Assemble and light
the cooker again as per the instruction manual. If this does not resolve the problem, please call Metal
Fusion, Inc. at (800) 783-3885 between the hours of 7:30am-3:30pm (CST) Monday through Friday.
5. Always use the LP Hose/Regulator assembly supplied with the appliance. Before each use of the
appliance check the LP Hose for evidence of abrasion, wear, cuts or leaks. If there is any damage to the
hose, the hose/regulator assembly must be replaced prior to using the appliance. Contact Metal Fusion,
Inc. at (800) 783-3885 for information regarding a replacement hose assembly. Only the LP
Hose/Regulator assembly specified by Metal Fusion, Inc. should be used with the appliance.
6. For purchase of any replacement parts which may have become damaged or lost, please contact Metal
Fusion, Inc. at (800) 783-3885 between the hours of 7:30am-3:30pm (CST) Monday through Friday.