Turning off and storing the appliance after use, Maintenance instructions, Never move the appliance while in use or still hot – King Kooker Fire Pit User Manual

Page 16

Advertising
background image

turnInG oFF And storInG tHe APPlIAnce AFter use

neVer moVe tHe APPlIAnce wHIle In use or stIll Hot.

1. After each use turn OFF the fire pit at the manual valve first, then at the gas cylinder valve. check

to make sure there is no flame and all valves are off. Do not leave the appliance until it has

cooled completely.

2. Disconnect the regulator from the cylinder by turning the Type 1 fitting counterclockwise until

the regulator is separated from the tank.

3. Storage of this appliance indoors is permissable only if the cylinder is disconnected and removed

from the appliance. Do not use or store cylinder in a building, garage or enclosed area. Read

and follow all cylinder manufacturer’s instructions. The cylinder must be stored out of the reach

of children at all times. Keep entire unit in area to avoid insects and contamination that can clog

the venturi tube.

FAIlure to Follow tHese InstructIons And wArnInGs could result In FIre,

exPlosIon, burn HAzArd or cArbon monoxIde PoIsonInG wHIcH could cAuse

ProPerty dAmAGe, PersonAl InJury or deAtH.

16

mAIntenAnce InstructIons

1

.

The area where the appliance will be used must be kept clear and free from combustible materials, gasoline and other
flammable vapors and liquids. Before each use of the appliance inspect and remove any combustible items.

2.

The flow of combustion and ventilation of air must not be obstructed. The appliance must be set in an open area
with 10 ft. (3.05m) of space on all sides and no roof or overhang overhead. Check the location and placement of the
appliance before each use.

3.

Before each use of the appliance check the burner/venturi tube for insects, insect nests, and other obstructions. A
clogged tube can lead to a fire beneath the appliance.

4.

Follow all Lighting Instructions in the Use and Care Manual each time the appliance is used. Check the flame for
proper color and appearance. The flame should be directed upward and toward the center above the appliance. A
normal flame will be blue near the burner ports and then become yellow above the lava rocks as it extends upward.
If a strong yellow flame is being emitted from the burner ports, this could indicate an obstruction in the burner/venturi
tube.

If there is any obstruction or a yellow flame near the burner ports, turn off the appliance and allow time for it to cool.
Disconnect the hose from the brass fitting. Remove the brass fitting from the venturi tube. Check the venturi tube with
a flashlight to see if there is a blockage. If a blockage is present use a wire such as a coat hanger to slide into the
venturi tube to remove the blockage. Assemble and light the appliance again as per the instruction manual. If this
does not resolve the problem, please call Metal Fusion, Inc. at (800) 783-3885.

5.

Always use the LP Hose/Regulator assembly supplied with the appliance. Before each use of the appliance check the
LP Hose for evidence of abrasion, wear, cuts or leaks. If there is any damage to the hose, the hose/regulator assembly
must be replaced prior to using the appliance. Contact Metal Fusion, Inc. at (800) 783-3885 for information regarding
a replacement hose assembly. Only the LP Hose/Regulator assembly specified by Metal Fusion, Inc. should be used
with the appliance.

6.

The burner should be inspected before each use. If the burner is damaged, it must be replaced before operating the
appliance. Only the burner specified by Metal Fusion, Inc. should be used with this appliance.

7.

For purchase of any replacement parts which may have become damaged or lost, please contact Metal Fusion, Inc.
at (800) 783-3885 between the hours of 7:30am-3:30pm (CST) Monday through Friday.

8.

Cleaning of the appliance:

Appliance and lP Hose/regulator: If neccessary, the appliance can be cleaned with mild soapy water on a rag and
towel dry. Do not immerse the burner unit or hose and regulator into water as this will cause rust.

lava rocks: Remove from fire pit and spray off with garden hose. Allow to dry completely before returning to bowl.

9.

Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect
the appliance and to replace any part of the control system and any gas control which has been under water.

Advertising