King Kooker Fire Pit - Manual (Page 9)

tools reQuIred:
torQue wrencH or AdJustAble wrencH, leAK testInG solutIon
1. Before assembling, check that all components are included in the shipping carton. Accessories
may vary according to model. Check the list of accessories on your box. The following parts are
considered essential and should be included in your package regardless of model number.
required Parts lists:
Fire Pit Frame, Fire Pit bowl with installed burner, brass Fitting with manual Valve and lP
Hose and regulator, lava rock (20 lb.), sandbag
If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the
hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your appliance.
3. Remove the fire pit bowl with installed burner from the fire pit frame. Remove and discard all
protective packing materials. Re-insert the fire pit bowl with installed burner into the fire pit frame
(the burner’s venturi tube should be inserted through the hole located on the side of the fire pit
frame.) Use caution when removing and inserting the fire pit bowl with installed burner as the
fire pit bowl and burner can be damaged if mishandled.
9
sectIon I
FIre PIt Assembly
tHe use And cAre mAnuAl must be reAd And understood
beFore usInG tHe APPlIAnce
Throughout this manual the words appliance, burner and fire pit will be used interchangeably to
refer to the King Kooker ® Outdoor Fire PIt.
FIre PIt FrAme
FIre PIt bowl
VenturI
burner