King Kooker Fire Pit - Manual (Page 17)

17
sectIon III
reAd And understAnd All InstructIons beFore
usInG your KInG KooKer ® Product
FreQuently AsKed QuestIons And Answers
1. my appliance’s flame appearance is very weak.
Answer: If the hose assembly has a Type 1 Connection (black/green knob), it is equipped with a
flow limiting device. This device is intended to limit the flow of gas should there be a leak between
the regulator and the appliance. To achieve a positive gas seal, which will allow for maximum gas
flow, the regulator control must be set to a completely OFF position before the cylinder valve is
opened. A good tip to remember is “TANK IS FIRST ON, LAST OFF.”
The Problem Can Be Remedied in Two Ways:
A. 1. Turn the manual valve to the OFF position. Close the tank valve completely by turning
it clockwise until it stops.
2. Check that the Type 1 Connection (black/green knob) is completely tightened to the
tank valve.
3. Wait 5 seconds for the pressure to equalize and for the flow limiting device to reset.
4. Turn tank valve ON (counterclockwise.)
5. Turn the manual valve to an ON position.
6. Relight appliance following all lighting instructions contained in this manual. Check for
proper flame characteristics.
or
B. 1. Turn the manual valve to the OFF position. Close the tank valve completely by turning
it clockwise until it stops.
2. Remove Type 1 Connection (black/green knob) from the tank valve. The flow limiting
device will now reset.
3. Re-attach Type 1 Connection (black/green knob) to the tank valve. Tighten completely.
4. Turn tank valve ON (counterclockwise.)
5. Turn the manual valve to an ON position.
6. Relight appliance following all lighting instructions contained in this manual. Check for
proper flame characteristics.
2. How long will the propane in my tank last?
Answer: On average, a full tank will give you 7 to 8 hours of normal operation.
3. I have a new style tank and it won’t connect to my regulator. what do I do?
Answer: The regulator supplied with this appliance has a Type 1 Connection which will attach to
the tank valve which has large threads on the valve outlet. These connect into the large plastic
handnut (black or green). If your tank has a quick disconnect valve (plug in type) our regulators
can not connect to this tank.
4. I have a brand new appliance and I cannot get the burner to light. what’s the problem?
Answer: Make sure the tank has been filled with propane. Tanks purchased from the store shelf
are most often sold empty. If this does not solve the problem refer to Maintenance Instruction
items #3 and #4, page 16. If you have questions please call Metal Fusion, Inc. at (800) 783-
3885.
IF you HAVe A QuestIon we HAVe not Addressed In tHIs mAnuAl
PleAse send us An e-mAIl At [email protected] or cAll 1-800-783-3885
between 7:30 A.m. And 3:30 P.m. cst mondAy tHrouGH FrIdAy.