Ransburg Air Line and Filter Heater A13230 - Manual (Page 9)

Air Line Heater / Filter Heater - Introduction
Ransburg
LN-9811-14.1 7
Note(s):
1. Outlet temperatures as noted above are based upon an inlet temperature of 68°F (20°C).
2. Heater should only be installed on a suitably fused electrical supply line. Please see
“Specifications” for recommended fuse size.
3. Intelligent, thermostatic control will maintain outlet temp as inlet temp and flow rate fluctuates
as long as capacity of heater is not exceeded.
4. Maximum temperature of 248°F (120°C) limited by built-in thermal overload device.
5. Chart reflects power off condition when flow is shut off to unit.