Final wiring – Securitron M380BD User Manual
Page 14
Advertising
PN# 500-23300
Page 14
Rev. B, 07/13
Final Wiring
1.
Pull wires/cables through the wire feed-through hole(s) that are drilled in the frame. All connections
to the terminal blocks may be made by pressing the locking mechanism, inserting the stripped wire
into the terminal recess and releasing to lock the wire in place.
The end user and installer are liable for Fire and Building code compliance.
2.
The following diagrams show basic wiring configurations for the Magnalock.
M370
M380BD
Advertising
This manual is related to the following products: