Securitron M380BD - Manual (Page 2)

PN# 500-23300
Page 2 Rev. B, 07/13
Recommended Tools
M370 / M380BD Specifications
Mechanical Electrical Environmental (Recommended)
Physical Size:
Height: 2.20” [56mm]
Depth: 2.45” [62mm]
Length: 10.00” [254mm]
Shipped Weight:
Weight: 6 lbs
Holding Force (Maximum)
600 lbs [272 kg]
UL Tested Ratings:
Static Holding Force: 500 lbs
[227 kg]
Dynamic Holding Force: 50 ft-
lbs [68 J]
Endurance: 250,000 cycles
Input Voltage
12/24 VDC
Current
M370
12VDC/500mA (±10%)
24VDC/275mA (±10%)
M380BD
12VDC/530mA (±10%)
24VDC/310mA (±10%)
Tamper Switch Rating
Voltage – 30VDC (Maximum)
Current – 1 Amp
DPS Rating (M380 only)
Voltage – 30VDC
(Maximum) Current – 125mA
Operating Temperature
32ºF to 110ºF [0ºC to 43ºC]
Humidity
10% to 90% RH
Magnalock Preparation and Installation
Pre-Installation Survey
Before installing the Magnalock, the mounting location should be determined and assessed for the
following:
 Physical strength of the frame should be strong enough to meet or exceed the holding force of
the Magnalock.
 Frame and vicinity should offer protection for the wiring to prevent vandalism.
 Door should be inspected for any obstacles that may interfere when mounting the strike plate.
 The Magnalock M370/M380 comes with factory default mounting for use with an outswing door.
Please contact Securitron for available brackets for other installation configurations.
Masking Tape #1 and #2 Phillips Screwdrivers Hammer
Measuring Device 1/2” Open End or Crescent Wrench Pencil/Pen
Center Punch Wire Strippers/Cutter Multimeter
Fish Tape or Lead Wire 3/16” Hex (Allen) Wrench
Drill bits: 3/16”, 7/32” (wood frames only), 3/8”, 1/2”