Securitron SABL INSTALLATION - Manual (Page 15)

PN# 500-19700
Page 15 Rev. C, 8/07
9. APPENDICES
A. Command Summary
WITH THE UNIT IN PROGRAM MODE (FAST YELLOW FLASH):
00 followed by 5-7 digits sets Program code.
01 followed by 2-7 digits set first User code.
02-followed by 2-7 digits sets second User code.
Additional User codes can be set up to the prefix 55 (total 59 User codes).
56-57 followed by 2-7 digits sets Passage Mode.
58-59 followed by 2-7 digits sets Lockout Mode.
71 will silence beeper at all times.
72 will return beeper to factory set.
73 will reverse light logic (red to echo, green to show door is open).
74 will return light logic to normal.
79 is alternate code delete. Any valid code entered directly after the 79 command will be
deleted.
88 will erase all user codes (not Program or Hard Code).
89 will return all functions (including timer) to factory set. Codes are unchanged.
Pressing 9 when in program mode sets the timer. Two digit codes must be entered from
01 to 09 seconds. Default is 3 seconds.