Sonnet Technologies Crescendo_PCI Processor Upgrade Card - Manual (Page 153)

Install Crescendo/PCI Processor
Upgrade Card
1. Remove the Crescendo card from the anti-
static package, making sure to handle the card
by the edges (Figure 5). Your card may differ
from what is pictured below.
2. Align the Crescendo card directly over the
Processor Card Slot on the logic board
(Figure 6). Gently press down until the card is
firmly seated in the Processor Card Slot, taking
care not to move or wiggle the board as you
install it into the slot.
Close Computer
1. Replace the case cover and security screw onto
your computer (Figure 7).
2. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
3. Affix the Powered by Sonnet label to the front of
your computer.
En
9-6
Figure 5; Figura 5
Figure 6; Figura 6
Crescendo card
Processor Card Slot
Figure 7; Figura 7
security screw
anti-static
package
Crescendo card
case cover
PCI TriManual-Chapters 1-13 3/30/01 5:57 PM Page 135