Gilderfluke&Co Z-Brick - Manual (Page 4)

A note about this manual:
This manual covers the specifics of the Z-
Brick. To program the Z-Brick you will need to
also need the PC•MACs manual sections that
cover the PC•MACs software.
Gilderfluke Show Control Equipment is
sometimes programmed in ‘Software-only’ or
‘Hardwareless Realtime’ mode. Refer to the
‘Quick Start’ sections of the PC•MACs manual if
you are unfamiliar with their use. If you are
using the PC•MACs MACs-SMP or MACs-USB for
programming your Z-Brick through the DMX-
512 input, please refer to the PC•MACs
‘Unlimited’ mode.
The full PC•MACs manual can be down-
loaded from our web site at:
http:/ /www.gilderfluke.com
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
iv of iv