Gilderfluke&Co BR-SmartMedia - Manual (Page 88)

receiving BrickNet, then the recorder’s clock will be locked to the
Smart Brick Brain’s frame rate. If the BR-SmartMedia is operating as
a ‘Dumb’ brick, it will sample the incoming DMX-512 data at the
frame rate set by the show which has been selected above. At
the end of the recording session, the BR-SmartMedia will report if it
has successfully recorded the show or not.
w) Wipe Show: This is a DMX-512 Recorder Mode specific com-
mand. It erases all the data in the show selected above.
g) Analogs to Ease-In: Please refer to the MultiShow section of this
manual.
i) Info: Please refer to the MultiShow section of this manual.
o) Reload Configuration: Please refer to the MultiShow section of
this manual.
p) Play a Show: Please refer to the MultiShow section of this manual.
r) Save Configuration: Please refer to the MultiShow section of this
manual.
t) Test Shows: Please refer to the MultiShow section of this manual.
x) eXit: Please refer to the MultiShow section of this manual.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
80 of 81