Gilderfluke&Co Sixteen Channel Servo Controller and Joystick Amp - Manual (Page 7)

PIN #40 BLACK Negative Reference #3
PIN #41 BROWN Joystick Amplifier Input #3
PIN #42 RED Positive Reference #3
PIN #43 ORANGE Negative Reference #2
PIN #44 YELLOW Joystick Amplifier Input #2
PIN #45 GREEN Positive Reference #2
PIN #46 BLUE Negative Reference #1
PIN #47 VIOLET Joystick Amplifier Input #1
PIN #48 GRAY Positive Reference #1
PIN #49 WHITE NO CONNECTION
PIN #50 BLACK NO CONNECTION
A typical connection for a pot is as follows:
10 VDC positive reference
to Joystick Amplifier input
negative reference
Potentiometer
(10K
Ω
typically)
If you need to reverse the direction of any of the potentiometer inputs, you can reverse the posi-
tions of the positive and negative references for that input potentiometer. A Double Throw, Double Pole
(DPDT) switch can be added if you will need to change it regularly:
Back of DPDT switch
Potentiometer
(10K
Ω
typically)
10 VDC positive reference
to Joystick Amplifier input
negative reference
The pot must swing symmetrically around its middle point when this option is used.
All of the positive and negative references fed to the pots are wired in parallel. If needed, a single
pair of wires may be used for the references to a number of different pots.
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
7