Gilderfluke&Co Analog Output Smart Brick (ver 2.nn w/Eprom memory) - Manual (Page 12)

output command to this output, you should then be able to adjust it for 10.00 volts using R4.
The adjustments for the endpoints on each of the sixteen outputs are individually set through
the setup screen.
G ILDERFLUKE & C O .¥ 205 S. F LOWER S T . ¥ B URBANK , CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX 818/840-9485
8 of 24