Installation, 1 transportation – IAI America RCS2-A6R User Manual
Page 31
2. Installation
25
2. Installation�
2.1 Transportation
[1] Handling of the Actuator
Unless otherwise specified, the actuator is shipped with 1 axis unit packaged separately.
(1) Handling the Packed Unit
�
Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
�
Transport a heavy package with at least more than two operators. Consider an appropriate
method for transportation.
�
Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
�
Do not step or sit on the package.
�
Do not put any load that may cause a deformation or breakage of the package.
(2) Handling the Actuator After Unpacking
�
Do not carry the actuator by its motor unit or its cable or attempt to move it by pulling the cable.
�
Hold the base part or bracket part of the body when transporting the actuator main body.
�
Do not hit or drop the actuator during transportation.
�
Do not attempt to force any part of the actuator.