IAI America FS User Manual
Page 34
Advertising
28
z
Do not pull the cable with a strong force.
z
Do not let the cable receive a turning force at a single point.
z
Do not pinch, drop a heavy object onto or cut the cable.
z
When fixing the cable, provide a moderate slack and do not tension it too tight.
Do not use spiral tube in any
position where cables are bent
frequently.
z
Separate the PIO line, communication line and power line from each other.
Arrange so that such lines are independently routed in the duct.
Power Line
Duct
I/O Line
(Flat Cable, etc.)
Advertising