IAI America SSPDACR User Manual
Page 36
Advertising
5. T
ransport
28
5.3 Handling an Actuator Assembled to a Mechanical System
When transporting an actuator that has been assembled to a mechanical system, as the whole system, take note
of the following points:
x
Secure the sliders to prevent sudden movement during transport.
x
If any end of the actuator is overhanging, secure it properly to avoid significant movement due to external
vibration.
x
If the actuator assembly is transported without the ends being secured, do not apply an impact of 0.3 G or
more.
x
When hoisting the mechanical system using ropes, etc., prevent the actuator, connector box, etc., from
receiving a load. Also make sure the cables are not pinched or deformed unnaturally.
Advertising