3 external cleaning – IAI America SSPDACR User Manual
Page 72
12. Maintenance/Inspection
64
Caution: If the actuator stroke is 400 mm or more, check the stainless sheet for slacking and position
deviation every month. If any slack or other problem is found, adjust the stainless sheet.
[For the adjustment procedure of the stainless sheet, refer to 13, “Replacement/Adjustment
Procedure for Stainless Sheet.”]
12.3 External Cleaning
x
Clean the exterior surfaces from time to time.
x
Wipe off dirt with a soft cloth.
x
Depending on the situation, base oil of grease may ooze out to the actuator surface. If oil has oozed out, wipe
it off using a soft cloth, etc.
x
To prevent dust from entering the actuator through gaps and openings, do not clean the actuator by blowing
highly compressed air onto it.
x
Do not use petroleum-based solvents as they damage plastic parts and painted surfaces.
x
If the unit gets badly soiled, moisten a soft cloth with a neutral detergent or alcohol and wipe the soiled area
gently.