Acon-c/cg, pcon-c/cg, 1 operation modes and functions – IAI America PCON-CFA User Manual
Page 19
2. ACON-C/CG,
PCON-C/CG
11
PLC
PLC
Flat cable
Communication
cable
2. ACON-C/CG,
PCON-C/CG
2.1
Operation Modes and Functions
ACON and PCON controllers supporting MECHATROLINK can be operated in a desired operation mode selected
from the following four modes.
* ACON and PCON that are compatible with MECHATROLINK are compatible with MECHATROLINK-I and II,
and are not compatible with MECHATROLINK-III.
Operation Modes and Key Functions
Key function
Remote I/O
mode
Position/simple
direct mode
Half direct mode
(*2)
Remote I/O
mode 2
Operation by position data
specification
x
{ (*1)
{
x
Direct speed/acceleration
specification
x x
{
x
Push-motion operation
{
{
{
{
Current position read
x
{
{
{
Current speed read
x
x
{
x
Operation by position number
specification
{
{
x
{
Completed position number read
{
{
x
{
Maximum position table size
512
768
Not used
512
(*1) The actuator is operated by specifying all position data, other than positions, using position numbers.
(*2) Cannot be used in the 17-byte mode.
[1] Remote I/O mode:
In this mode, the actuator is operated by PIOs (24-V I/Os) via MECHATROLINK
communication.
ACON/PCON not supporting
MECHATROLINK
PIO connection
ACON/PCON supporting
MECHATROLINK
MECHATROLINK connection