Inter-M PAC-5000 - Manual (Page 21)

DIGITAL PA COMBINATION SYSTEM
19 PAC-5000
ƒU Adjust an input level volume on the front part properly and then press the chime button.
ƒU During a chime is being output to a Group not selected, the broadcasting is suspended.
But, when giving MIC1 broadcast, it is being output by mixing with chime.
※ Caution : MIC FUNCTION button must be turned ON so as to operate a chime. And if the chime
button is pressed during copying, the chime is output after the copying is cancelled.
2) Resetting method for speaker zone Group
User is available to nominate positions of total 24 zones randomly by allocating 12 zones to Group A and
12 zones to Group B. ZONE1~12 were allocated to Group A and ZONE13~24 were allocated to Group
B in default, whose 12 numerals per Group should be respected.
- When press GROUP-A (or GROUP-B) button for a long time, 12 ZONEs currently set up will be
displayed. (LED blinks)
- When reset 12 ZONEs to be changed and then press GROUP A (or GROUP B) button one more time, a
final state will be displayed on the screen that the setting state will have been finished. For example,
ƒU Make it turned OFF by pressing ZONE1~4 button and make it turned ON by pressing ZONE13~16 button.
ƒU When press GROUP-A button, the above state will be changed and stored in Group A, whose processing
state will be displayed on the screen, that will be converted into Stand-by sate automatically. And the other
ZONEs will be allocated to Group B automatically.
ƒU If a number of zones is less than or more than 12, it will be stored so that it will display “Cancel” on the
screen and be converted into Stand-by automatically.
¢
¢
➡
➡
PAC5000_E 2008.7.1 5:59 PM 페이지 22