Inter-M PAC-5000 - Manual (Page 30)

DIGITAL PA COMBINATION SYSTEM
28 PAC-5000
- Using PRESET ▼ / ▲ buttons or the numerals(0~9) buttons, select a number to be memorized and then press
MEMO button to store the broadcast frequency in the corresponding number.
- By repeating the procedures from 1) to 3) above, it is available to store up to 40 broadcast frequencies.
- It is available to select a broadcast frequency you desire from the stored ones by using PRESET
▼ / ▲ buttons.
3) Install FM antenna
Connect it to FM antenna terminal. And while receiving a broadcast, determine an installing place and
direction making the receiving state to be best and then fix it firmly. You may feel noises even if the FM
exclusive antenna was installed in the surroundings of a downtown having a heavy traffic density,
factories, or high voltage transmission lines. In such areas, install an outdoor antenna with 75
Ω cable.
4) FM MUTE
No displaying of TUNED indicates in most a case that it is not of a broadcast or it receives many noises.
When press FM MUTE button, on the display window displays “AUTO” and that intercepts a noise output.
When it starts receiving a normal broadcast signal, TUNED display is lit that outputs automatically the
broadcast since then.
※ Caution : In some cases TUNED display may be lit influencing from peripheral equipments not from
broadcasting frequencies, install the system apart from such peripheral equipments that may
influence it such as CDP.
5. OPERATING METHOD FOR MEDIA (CD/DRP/USB)
1) Select an input mode
- By pressing the input selection buttons of Group A and B, displace the input display LED at the position of MEDIA.
- When pressing MEDIA FUN. Button, it changes in the order of CD > DRP > USB mode.
2) Playback/pause function
- CD
ƒU It playbacks a disc produced with CD-DA/MP-3/WMA.
ƒU By pressing MEDIA FUN. Button, select the CD mode.
➡
➡
➡
➡
PAC5000_E 2008.7.1 5:59 PM 페이지 31