JuiceGoose iP 1520 - Manual (Page 16)

RAW TCP CONTROL
It is possible to control and monitor iP1520 over Ethernet using raw TCP proto-
col. In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP1520
over a TCP/IP connection using a suitable TCP/IP client program. Once the
connection is made, the serial port console and its commands are available to
the user over TCP/IP as if the user was connected to IP1520 over the local se-
rial connection.
By default, TCP feature is disabled due to security reasons. This can be en-
abled through the web interface. The default TCP port is 33333; this can also
be changed through the web interface.
To enable TCP feature, click on iP1520 Management link on the web interface
and then click on Configuration tab. Mark the button called Enable in the TCP
section. Change the default TCP port, if needed.
Page 15