Power loss feature – JuiceGoose iP 1520 User Manual
Page 19
POWER LOSS FEATURE
The power loss feature on the iP1520 ensures that in the event of a power out-
age the previous state is remembered when power is returned.
Effectively this means that if you have PODs in an activated state and the
power fails, when power is restored the PODs that were previously activated
will sequence back up in accordance with the sequence delay currently active.
To enable the power loss feature, click on iP1520 Management link on the web
interface and then click on Configuration tab. You will see a check box under
the Power Loss Feature section. Checking the box enables the feature.
NOTE:
Please note, a delay of up to 5 seconds can occur between issuing a command
in the web server and the iP1520 storing the state. So if power is lost just after a
command has been issued the state may not be remembered.
Page 18